floyd digital fundamentals 10th edition pdf

Q D Example EN Determine the Q output for the D latch, given the inputs shown.

If EN is LOW, then there is no change in the output and it is latched. S R EN Qħ Summary Latches The D latch is an variation of the S-R latch but combines the S and R inputs into a single D input as shown: D Q Q D EN EN Q Q A simple rule for the D latch is: Q follows D when the Enable is active.Ĩ Summary Latches The truth table for the D latch summarizes its operation. Q R Solution Keep in mind that S and R are only active when EN is HIGH. S Q EN Example Show the Q output with relation to the input signals. The gated latch has an additional input, called enable (EN) that must be HIGH in order for the latch to respond to the S and R inputs. 1Q S-R latches are frequently used for switch debounce circuits as shown: 2Q Position 1 to 2 Position 2 to 1 S R Q VCC 3Q S 4Q R 74LS279AĪ gated latch is a variation on the basic latch. To SET any of the latches, the S line is pulsed low. It features four internal latches with two having two S inputs. 1 Q 1 Rĥ Summary Latches The active-LOW S-R latch is available as the 74LS279A IC. 1 S 1 Q Latch initially SET Never apply an active set and reset at the same time (invalid). 1 S 1 Q Latch initially RESET 1 Q 1 R To RESET the latch a momentary LOW is applied to the R input while S is HIGH. To SET the latch (Q = 1), a momentary LOW signal is applied to the S input while the R remains HIGH. Assume the latch is initially RESET (Q = 0) and the inputs are at their inactive level (1). Latch initially SET 1Ĥ Summary Latches The active-LOW S-R latch is in a stable (latched) condition when both inputs are HIGH. Latch initially RESET 1 R S Q 1 To RESET the latch (Q = 0), a momentary HIGH signal is applied to the R input while the S remains LOW. To SET the latch (Q = 1), a momentary HIGH signal is applied to the S input while the R remains LOW. R S Q 1 Assume the latch is initially RESET (Q = 0) and the inputs are at their inactive level (0). R S Q Q Q Q S R NOR Active-HIGH Latch NAND Active-LOW Latchģ Summary Latches The active-HIGH S-R latch is in a stable (latched) condition when both inputs are LOW.

With NOR gates, the latch responds to active-HIGH inputs with NAND gates, it responds to active-LOW inputs. It can be constructed from NOR gates or NAND gates. The S-R (Set-Reset) latch is the most basic type. Presentation on theme: 'Digital Fundamentals Floyd Chapter 7 Tenth Edition'- Presentation transcript:ġ Digital Fundamentals Floyd Chapter 7 Tenth EditionĢ Summary Latches A latch is a temporary storage device that has two stable states (bistable).

Floyd digital fundamentals 10th edition pdf